Now that we've all agreed that, while selling your used backup tapes on eBay or to a recycler may be good for the environment, it could also be hazardous to your employer and/or your career, the question remains: How do you dispose of old backup tapes? Do you just keep them squirreled away in storage, hoping to retire before you have to deal with it? Or do you just throw them in the trash, secure in the knowledge that the data is AES-encrypted?

Howard Marks, Network Computing Blogger

September 12, 2008

4 Min Read

Now that we've all agreed that, while selling your used backup tapes on eBay or to a recycler may be good for the environment, it could also be hazardous to your employer and/or your career, the question remains: How do you dispose of old backup tapes? Do you just keep them squirreled away in storage, hoping to retire before you have to deal with it? Or do you just throw them in the trash, secure in the knowledge that the data is AES-encrypted?Assuming that you have some tapes you wrote data to before you started encrypting -- and let me take this opportunity once again to remind you that you should be encrypting all your tapes, even if you just use the encryption function in your backup software and used the same key for all your tapes -- keeping them forever isn't really a good idea. Some smart lawyer will try to subpoena your really old data and you'll be working nights and weekends to deal with it.

The first thing you have to decide is how badly someone wants the data on your old tapes. If you think someone may dumpster dive for your tapes and then spend many, many dollars to recover the data with electron microscopes and other cool spy stuff, simple solutions aren't going to cut it.

Let's take a quick look at alternatives good enough for sensitive, but not classified, information for those of us in the real world. I'll rate each approach from 1-5 in hassle, odds of data recovery, environmental impact, and cost.

Running the tape through your drive and telling your backup software to erase, or write nonsensitive data to the tape, can be effective, if very slow. It also won't work with damaged tapes or for tapes you don't have a working drive for. The wear and tear on your tape drives also is an issue.

Once they're overwritten, tapes can be tossed in the trash or even sold for recycling. If the NSA's after you, it may be able to recover some data from previous backups, but it will require specialized hardware, so Akbar and Jeff's Industrial Espionage probably can't. Hassle -- 5; odds of recovery -- 3; environmental impact -- 4; cost -- 3.

Physical destruction is so satisfying, especially the toss of tapes in a bonfire type. Burned tapes are pretty much impossible to read, but the noxious fumes could kill you and land you in the slammer if Ranger Rick comes to see what all the black smoke is about. Hassle -- 3; odds of recovery -- 5; environmental impact -- 5; cost -- 1.

Running the tapes through an industrial shredder or wood chipper also makes them unreadable and the bits can go in the landfill with the rest of the trash. It's emotionally satisfying and can supply your organization with all the confetti you need for years. On the other hand, industrial shredders are expensive. Hassle -- 1 (if you have the shredder or use a drive-up shredder truck); odds of recovery -- 5; environmental impact -- 2; cost -- 3.

Degaussing, or bulk erasing, wipes the magnetic domains on your tapes by exposing the tapes to a strong, alternating, magnetic field. Back in the old days, when we made cassette recordings of LPs and FM broadcasts, running the cassette through a $30 Radio Shack bulk eraser cut the background noise substantially, especially if you were reusing a tape.

I recently had a client pull the bulk eraser they previously used on floppy disks and 9-track tapes out of a closet to use on some SDLT tapes they were retiring as part of a switch over to LTO (Linear Tape-Open). I convinced them to try to read a tape after it had been through the bulk erase cycle and it worked like a champ. Today's tapes have 2 to 3 times the coercivity of older media and require a much stronger magnetic field to erase.

You can get degaussers suitable for today's tapes, and even hard drives, from vendors like Garner Products for $2,000 and up. Also bear in mind that, while you can degauss DLT (Digital Linear Tape) and SDLT (Super DLT) tapes and reuse them, LTO tapes have a prerecorded magnetic servo to align the heads to tape tracks. Degauss these tapes and they're useless. Hassle -- 2; odds of recovery -- 5 (if you have the right degausser); environmental impact -- 2; cost 4.

If the NSA is after you, I suggest degaussing AND shredding.

About the Author(s)

Howard Marks

Network Computing Blogger

Howard Marks is founder and chief scientist at Deepstorage LLC, a storage consultancy and independent test lab based in Santa Fe, N.M. and concentrating on storage and data center networking. In more than 25 years of consulting, Marks has designed and implemented storage systems, networks, management systems and Internet strategies at organizations including American Express, J.P. Morgan, Borden Foods, U.S. Tobacco, BBDO Worldwide, Foxwoods Resort Casino and the State University of New York at Purchase. The testing at DeepStorage Labs is informed by that real world experience.

He has been a frequent contributor to Network Computing and InformationWeek since 1999 and a speaker at industry conferences including Comnet, PC Expo, Interop and Microsoft's TechEd since 1990. He is the author of Networking Windows and co-author of Windows NT Unleashed (Sams).

He is co-host, with Ray Lucchesi of the monthly Greybeards on Storage podcast where the voices of experience discuss the latest issues in the storage world with industry leaders.  You can find the podcast at: http://www.deepstorage.net/NEW/GBoS

Never Miss a Beat: Get a snapshot of the issues affecting the IT industry straight to your inbox.

You May Also Like


More Insights